PDA

View Full Version : Scrubber



gtfcniles
04-30-2011, 07:41 AM
Hi Everyone,

I'm in the planning stages of building my scrubber, planning on having a cube 300x300x400 (wxdxh) with 4 screens in with a central bulb.

http://www.ultimatereef.net/uploader/2011Q2/turfscrub.JPG

Been looking at what bulb would be suitable would this one be ok?

http://cgi.ebay.co.uk/CFL-Hydroponic-Gr ... 1e6039a3f1 (http://cgi.ebay.co.uk/CFL-Hydroponic-Grow-Lamp-Bulb-125w-Red-2700k-/130463409137?pt=UK_HomeGarden_Garden_PlantsSeedsBu lbs_JN&hash=item1e6039a3f1)

I'm planning on having a sealed system with an airstone in the bottom of the turf scrubber with the only air outlet through a condensation coil returning to the tank reducing evaporation, without creating a oxygenless atmosphere.

Thanks in advance,

gtfcniles

SantaMonica
04-30-2011, 07:19 PM
That bulb is huge... way too big for any scrubber. Multiple smaller ones are always better.

As for the needing to supply air/oxygen, you don't need to. Contact with water is all the screen/algae needs. So you can seal it completely if you want.