Advice on Plant-Grow LEDs

[Midway]

Hi there,

I already have a scrubber setup on my 240 gals reef with 4 23W CFL bulbs two on each side. I want to do the same for my Clownfish breeding setup here. Now I'd like to experiment with these new Plant-Grow LEDs like these;

http://www.ebay.ca/itm/1Pc-E27-RED-BLUE-60-LED-Hydroponic-LED-Plant-Grow-Light-New-1-9W-3W-3-8W-/281001972910?pt=LH_DefaultDomain_0&var=580148056508&hash=item416d05d4ae&_uhb=1#ht_2239wt_1111

I would like to have a 10 X 10 scrubber good for like 10 cubes a day or something. how many of these little guys would I need in order to light this size of screen from both sides?

Thanks for your help guys.

Manny

[SantaMonica]

1/2 the CFL wattage.

[Midway]

So that would be 50ish watts right? then these little bulbs will not do the trick. Anyone that can recommend some good LED light out there?

[inky]

Something like http://www.ebay.co.uk/itm/DIY-6-x-3W-RED-LED-650nm-660nm-Plant-Glow-Light-w-Driver-12V-24VDC-Input-/390497336126?pt=LH_DefaultDomain_0&hash=item5aeb747b3e or http://www.ebay.co.uk/itm/DIY-3-x-3W-Red-Grow-LED-650-660nm-w-Driver-Heat-Sink-12VDC-Input-Aquarium-/220866293590?pt=LH_DefaultDomain_0&hash=item336ca82f56 would be good

[Pulse]

Look at 660nm phillips LED's on rapidled.com. You will have to build the fixture yourself but is is pretty simple and not unknown ground anymore. I would give you a build thread link but I am at work on my phone, I am sure you can find one if nobody else posts a link though.

[firebird]

http://www.thereefuge.com.au/board/threads/firebirds-led-build-if-i-can-do-it-then-anyone-can.4130/#post-56781

is literally a step by step method of my build-same principles would apply to any build

[Midway]

Thanks for all the advice guys. I'll make sure to check this out!!