again a new starter

[Paul Vingerhoets]

Hello, mij name is paul living in the netherlands.
I own a zeeaquarium now it's about 200 l. Now. This one will be going away and there is a new one coming 180*70*65 cm. I also want to start with ATS

I do have 1 question iss it possible to make a upstream scrubber with only te water from bottum to top ?

I mean putting the drain from the disply down to the bottom of the sump with a slot in it en put the screen on top of it ? As if a waterfallscrubber wrong site up

I hope somewone understand what i mean. My englisch writing is bad i now.

Best regards
Paul Vingerhoets

[Floyd R Turbo]

Well yes I suppose you could do that, but if it is a submerged device like that you can just go with a standard upflow scrubber type design and not use the slot pipe. Just direct the overflow line into the chamber with the screen in it for water turnover

[SantaMonica]

Welcome.

Yes you can do that, like this:

4901 4902

[Paul Vingerhoets]

I don't think there are any bubbles koming out of the drain, the overflow will made out of 2 pipes 1 low en 1 high in the lowest there is a valve for silensing out.

but where are the air bubbles for ? to diliver co2

[Floyd R Turbo]

supposedly.

[SantaMonica]

You can add a venturi for air. You will need to experiment first.

A better way is to let the overflow splash down into a growth compartment.

4912