water dog
12-14-2013, 05:37 PM
New to the forum as a member but have been reading it for a while and decided to try my luck with a ATS.
First I built a UAS lit on one side with big cfl and it grew very well but the noise drove me out of my mind being right next to my bed so as a cheap person with some experience with acrylic, decided to build a L2 version but smaller as my reef tank has but 1 clown and I feed maybe 1 cube a day. Screen is lit buy 4 phillips 660's and one 440 on each side, screen being 4.25" x 4.25" and fed by a rio pump with good flow.
I split my screen into two pieces (i was having a spike with phos when i cleaned the whole screen) and clean only one at a time. GHA has started growing on screen and I am seeing the one problem rock in main tank with gha growing much less than a month ago. Almost gone.
The lights, driver, heat sinks and acrylic all for $110 and I already had the rio pump.
Thanks to all you guys for your posts and designs that helped me out with my tank.
First I built a UAS lit on one side with big cfl and it grew very well but the noise drove me out of my mind being right next to my bed so as a cheap person with some experience with acrylic, decided to build a L2 version but smaller as my reef tank has but 1 clown and I feed maybe 1 cube a day. Screen is lit buy 4 phillips 660's and one 440 on each side, screen being 4.25" x 4.25" and fed by a rio pump with good flow.
I split my screen into two pieces (i was having a spike with phos when i cleaned the whole screen) and clean only one at a time. GHA has started growing on screen and I am seeing the one problem rock in main tank with gha growing much less than a month ago. Almost gone.
The lights, driver, heat sinks and acrylic all for $110 and I already had the rio pump.
Thanks to all you guys for your posts and designs that helped me out with my tank.