Snoopy
12-19-2013, 09:55 PM
Hello
A mate asked me to make him up a bubbler so I thought I'd show some pics here.
I couldn't find anything like SM's covers for it - all the microwave dinners are boxed here so it was impossible to see. So I went for some butchers plastic trays instead. A little heavier so the magnets cost more. This made the screen size about 7"x10" so I thought I'd super light it up with 8 x 3w LEDs on two separate heatsinks. (I'm only starting it off with 4 x 3w LEDs till the screen greens up).
Because the unit needs to sit length ways in a sump, I couldn't get an air hose to bubble the full length of the screen with the air pump i have so I used an old air curtain I had. This works okay now but will have to wait and see how it goes when algae starts to cover it.
Dry side
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/8A993727-6F1D-4158-A070-8AE43C8FE3EE-11574-00000CEE9F65A843_zps6321f27e.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/3A66E244-1B1C-4A60-B8FF-2A70185406AA-35539-00000FAB05D0A43D_zps9edcb58e.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/43585EF5-B292-4CF5-B0AE-0DB9DD7F0475-35539-00000FAB4C66D903_zpsbee3361e.jpg
Wet side (coated the magnets in resin)
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/2FE7DFF8-3A5D-45D2-B0BE-4DC6CA156C3D-11574-00000CEEA8DACDCF_zps1f6585f6.jpg
Joined (it holds)
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/79F2C15E-CBCF-46CE-840B-F8618F3B7CA2-11574-00000CEEB3279C4C_zpsc775f951.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/186B202E-2B96-43B8-9347-0B9C092DE858-35539-00000FAB5B9A364A_zps7457e2ca.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/5AEAD369-BC71-4FA0-80BB-E1E5E0960F88-35539-00000FAB69922870_zps54f8c803.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/005F357E-4A08-4C04-B4D9-26EA9E171354-35539-00000FAB7C679EEF_zps3e9b4e83.jpg
The magnets are only just holding on my gonni tank (10mm) but the intended sump placement has thinner glass so should be fine. I could use Velcro to keep the dry side (heavy side) in place once the right position is worked out. This would also help to keep the dry side in place when the screen is cleaned.
The screen is not glued either - just sits inside the cover which i think will help with easier cleaning.
Cheers
Snoops
A mate asked me to make him up a bubbler so I thought I'd show some pics here.
I couldn't find anything like SM's covers for it - all the microwave dinners are boxed here so it was impossible to see. So I went for some butchers plastic trays instead. A little heavier so the magnets cost more. This made the screen size about 7"x10" so I thought I'd super light it up with 8 x 3w LEDs on two separate heatsinks. (I'm only starting it off with 4 x 3w LEDs till the screen greens up).
Because the unit needs to sit length ways in a sump, I couldn't get an air hose to bubble the full length of the screen with the air pump i have so I used an old air curtain I had. This works okay now but will have to wait and see how it goes when algae starts to cover it.
Dry side
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/8A993727-6F1D-4158-A070-8AE43C8FE3EE-11574-00000CEE9F65A843_zps6321f27e.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/3A66E244-1B1C-4A60-B8FF-2A70185406AA-35539-00000FAB05D0A43D_zps9edcb58e.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/43585EF5-B292-4CF5-B0AE-0DB9DD7F0475-35539-00000FAB4C66D903_zpsbee3361e.jpg
Wet side (coated the magnets in resin)
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/2FE7DFF8-3A5D-45D2-B0BE-4DC6CA156C3D-11574-00000CEEA8DACDCF_zps1f6585f6.jpg
Joined (it holds)
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/79F2C15E-CBCF-46CE-840B-F8618F3B7CA2-11574-00000CEEB3279C4C_zpsc775f951.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/186B202E-2B96-43B8-9347-0B9C092DE858-35539-00000FAB5B9A364A_zps7457e2ca.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/5AEAD369-BC71-4FA0-80BB-E1E5E0960F88-35539-00000FAB69922870_zps54f8c803.jpg
http://i1225.photobucket.com/albums/ee391/Choppa_Dan/Algae%20Scrubber/005F357E-4A08-4C04-B4D9-26EA9E171354-35539-00000FAB7C679EEF_zps3e9b4e83.jpg
The magnets are only just holding on my gonni tank (10mm) but the intended sump placement has thinner glass so should be fine. I could use Velcro to keep the dry side (heavy side) in place once the right position is worked out. This would also help to keep the dry side in place when the screen is cleaned.
The screen is not glued either - just sits inside the cover which i think will help with easier cleaning.
Cheers
Snoops