PDA

View Full Version : The Trick of Dark Brown Algae



SantaMonica
01-14-2009, 12:25 PM
Update: The Trick of Dark Brown Algae

This has now happened to many people who have new scrubbers. They get early growth, but it's not the green stuff that they see in most pics. Instead it's a dark brown super-thick "coating", or a black "tar", that looks like it was poured on:

http://www.radio-media.com/fish/LFSscreenDay14removed.jpg
http://www.radio-media.com/fish/UserReefskiOnMD-11.jpg
http://www.radio-media.com/fish/UserNM983onAS-1.jpg




What you have here is the type of algae that grows when nutrients are extremely high(!). After a few cleanings, when the nutirents come down, the color will lighten up to some balance point where it will stay. The big problem, however, is that people think the screen is not growing, so they leave it in to "grow more" (by not cleaning it). BIG MISTAKE! This type of algae does not grow thick, at all. It never gets more than 1/4" or so. And worse, since it's SO DARK, it block all light from reaching the bottom layers, thus causing those layers to die and release nitrate and phosphate back into the water. So the solution is to clean ANY and ALL dark brown/black algae right away, and don't even wait until the end of the week. Basically, if you cannot see your screen, then light is not reaching it and it needs to be cleaned. You'll only have to do this a few times before the nutrients come down and the algae color lightens up. Don't fall for the Dark Brown Algae Trick.