Purchase here
https://www.santa-monica.cc/DROP-10_p_110.html
A new unit is coming soon... a 10-sized (5.5 for freshwater) submersible DROP model that pulls up with one hand for cleaning.
Printable View
Purchase here
https://www.santa-monica.cc/DROP-10_p_110.html
A new unit is coming soon... a 10-sized (5.5 for freshwater) submersible DROP model that pulls up with one hand for cleaning.
Evil eyes?
Batman cave?
Red headlights?
It's actually the first look at the top of the DROP-10 which is the largest bubble upflow UASŪ scrubber ever made.
Attachment 8947
Another look at the DROP-10. The biggest upflow scrubber yet (10 cubes) which is even bigger than our SURF-8.
Super easy pull-up growth tray, no turning off water or air, and no disconnecting any pipes or tubing.
Attachment 8950
A look inside the first built DROP-10 with the growth tray pulled out. Eight air outlets, and four GEM5 lights.
Super easy pull-up growth tray, no turning off water or air, and no disconnecting any pipes or tubing.
Attachment 8951
The bottom of the growth tray: Catches growth that hangs down; is white to reflect more light; and has funnels to catch bubbles from the air tubings and direct the bubbles up the Green Grabber walls and strings.
Super easy pull-up growth tray, no turning off water or air, and no disconnecting any pipes or tubing.
Attachment 8952
The top of the lid of the DROP-10. The logo lights up red from the GEM5 lights inside.
Super easy pull-up growth tray, no turning off water or air, and no disconnecting any pipes or tubing.
Attachment 8953
The DROP-10 with the growth tray in place, ready to set in sump.
Attachment 8955
Now taking early orders
https://www.santa-monica.cc/DROP-10_p_110.html
The DROP-10 air tubings, which sits below the air director of the growth tray.
Attachment 8956
The DROP-10 on the bottom of a large sump.
Attachment 8957
Price will change periodically. 2 week ship time. 1 year warranty. 10 feet (3m) of 1/4" silicone tubing included. The recommended air pump is the smaller 25 watt version here, which connects directly to the included silicone tubing:
https://pentairaes.com/outdoor-air-pumps.html
Dimensions:
14" (35cm) long
5 1/2" (14cm) wide
9" (23cm) tall (add extra 2" for handle)
The DROP-10 needed to be the most scrubber surface area in the most compact space that could fit into large sumps but still leave room for other equipment. It's larger than even our current largest model SURF8.
It's totally submersible. Or it can be put into as little as 6 inches of water, but filtering is reduced because some of the growth surface will be out of the water.
It needed a one-handed pull-out growth tray, because something this big would not fit into most sinks. So it's basically two scrubbers units... the inside growth tray and the outside illumination shell.
The lights needed to be easily replaceable, as well of course, as submersible and high power. So the design uses the well tested GEM5 lights in the 660nm deep red growth color, with snap-in light holders; and it routes the wires through a light-blocker.
To keep all the light in, the entire structure is black, but to maximize the light inside, the inside surfaces are covered with white. The growth surface is the very well tested Green Grabber growth surface with epoxy, heavy silica rock, and growth attachment strings that reach out into the middle areas.
The bubbling system was a challenge because the bubbler could not be attached to the tray or else you could not remove it with one hand. So it has a patent pending bubble director that allows you to lift out the growth tray without turning off or disconnecting anything, but it still directs the bubbles to travel upwards to rub the growth surface.
The water circulation, which is powered by the bubbles, had to pull water in from under the growth tray in order to feed the water to the bubble director, and it does this through circulation holes at the bottom. Then as water and bubbles flow upwards, the air needed to be separated from the water at the top of the growth tray, and this is done with a patent pending air containment compartment at the top, with strainers to keep algae and light from flowing out; the water then circulates back around and exits the side circulation holes, which also block light.
Most of the panels are 3/16" thick PETG, with the top panel being 1/4", and the bubble director panel being 1/2".
The recommended air pump is the smaller 25 watt version here, which connects directly to the included silicone tubing:
https://pentairaes.com/outdoor-air-pumps.html
ThirstysReef shows the first ten days of growth from brand new, of the DROP-10
Super easy pull-up growth tray, no turning off water or air, and no disconnecting any pipes or tubing.
https://youtube.com/shorts/YOsICZNwA-c
https://www.facebook.com/SantaMonica...91446980271213
https://www.instagram.com/p/DLYKtndIevL/
https://x.com/SantaMonicaFil/status/1938336003208663259
https://www.threads.com/@santamonica...st/DLYLjsUJF-I
First version of instructions for the DROP-10
https://algaescrubber.net/DROP-Large-Instructions.pdf
Attachment 8972
DROP scrubbers are not affected by power outages like waterfall scrubbers are; all growth is underwater and does not dry out, and can stay alive for a week with no flow. Don't try this with a waterfall scrubber.
Attachment 8975