Search:

This small HOG.5 which is the same physical size as the HOG1 and HOG1x takes up little space inside sump cabinets. This Hog is probably too small to do real filtering on this larger tank but it can...

This is a HOG.5 scrubber® that is newly installed; it is one LED, and a small Green Grabber® algae attachment area. Since it is shown here on a large sump, is can only be used to grow fresh food for...

Here is a simple filtering/feeding setup for freshwater; it's either a HOG.5 or HOG1 and the fish will learn to pull algae out of the holes to eat.

8428

This HOG.5 with just a single LED light has been running in shallow saltwater, about 4 inches deep (probably because no deeper area was available), and you can see the waterline where growth occurs...

8310

Peek-A-Boo the red shines through, when you look into the HOG.5

8295

Growing some food, and doing some filtering, in freshwater with a HOG.5 scrubber

8256

Update: Since the Fusion 700 air pump is no longer available, the Danner AP-4 is now recommended for most scrubbers, except the SURF4 or 4x which can use a Danner AP-8, and the SURF8 which needs a...

This customer's HOG.5 show a rare pattern of growth only in the middle. The growth is Ulva Fasciata and is common in saltwater; it looks just like Easter basket grass and is probably the favorite...

Another one for freshwater: This HOG.5 in a guppy tank makes food that is fed back to the guppies. Filtering and feeding all in one...

7761 7762 7763 7764 7765


Video:
...

Michael Langerman loves guppies, and hand-made a nice little aquarium for them and put our HOG.5 on it to filter the water. The HOG.5 consumes ammonia and nitrate so you don't have to change the...

Updated HOG.5 listing (finally after 3 years).

"The [HOG.5] is working well" -- JT Powell

"Boom... 7 days growth from my HOG.5" -- rdevoe11 on the R2R site, pic:

5698

Purchase here:
http://www.santa-monica.cc/HOG5-Hang-On-Glass-UAS-Upflow-Algae-Scrubber--12-Cube-feeding-per-day--MAGNET-VERSION_p_21.html


Comment from Masgatigata on the R2R site: "I added my...

Nice HOG.5 video in FW:
http://youtu.be/y59C7mjR-e0

Nice!

Here another one: Comment from Jim Stime the LA Fish Guy: "The HOG.5 has produced lots of algae growth each week, and the inside of the [customer's] tank is starting to be more coralline...

Just tape it. Or get the suction cups from the shopping cart site. Won't over heat.

Probably not; it's the growth that blocks the light.

But the extra growth on the 2 extra surfaces is.

I think the extra acrylic might block too much of the light when it grows.

Keep the bubbles the same.

Try a very firm toothbrush.

1. Yes it works that way but yours is not growing black.

2. You can try it.

3. All that stuff should be brushed off during cleaning, including off the black shell and between the holes. so that...

Try going 3 weeks before cleaning.

Well also, even if they are on the correct unit, they have to be correct-side-up :)

So, anyone else getting multiple HOG.5 units... be sure to keep matched pairs together.

Got 'em!

It was what I thought... you had switched the units... the lights from unit "A" were on the screen for unit "B", and vise versa. Since they were pre-matched here, they won't hold if they...

What is the glass thickness?

Yes brush it with a toothbrush, including the cover.

The HOG.5 is designed to be low cost, not low-noise. Low-noise would be much more costly because of the more elaborate case. Also, you can adjust the sound by moving the flexible segments of the...

Should be ok. I used Kent's Iron+Manganese

Less hours. Keep the screen against the back cover. Get lots of flow through it. Add iron. Let grow more days.

Use a toothbrush to get all off.

Yes clean all the dark stuff off, but it's starting to burn so 16 is enough for now. Could add iron, and more bubbles would help.

Yes most people were burning the screen with 2 leds. It's a 3 watt 660nm.

Go to 16 hours.

Can leave them in if you want. Main thing is to not let them collect particles.

Take it out.

The phosban is slowing down the scrubber, and also removing the display algae. Let the scrubber go to 21 days, and increase light to 10 hours.

It keeps nutrients in the water lower, which lets the scrubber grow greener, which filters better.

Any growth in a scrubber is good. And green is better.

Don't pull growth off; let it fade away on it's own.

Let it go 14 days and post a pic.

Is there any growth?

Technique for getting stronger hold on the glass: Rough up the contact points of the covers with a file. The covers have a gloss coating that is slippery, and if you remove it and leave file marks on...

Here is all you need to know ... :)
http://algaescrubber.net/HOG.5-Instructions.pdf

10mm... 3/8 inch. Maybe. If there is not too much electric cord hanging, and not too much pulling on the airline, it would help. We are getting much better at lining up the magnets and some of them...

You should silicone them like we are doing now with the new ones.

There are no inexpensive magnets. Try what you can to get it to work.

Finally a pic of the black aquarium silicone that we are using now to seal the magnets...
3749



... also we've learned how to line up the magnets exactly before the glue sets; this really...

Any single scrubber and heavy feeding will get a spike. The HOG.5 is too small to clean half; easier to get a second one and clean one each week.

Well we are now sealing the magnets in black Aqueon aquriuum silicone (Ebay, etc). Very permanent, very flexible, and totally sealed. It adds another whole day of drying time to the building process...

We are now covering the magnets in black silicone and it works great. Any glue will work actually, even super glue frag gel which dries underwater. Just put it over yours and it should be good for...

Another improvement: The magnets are now being covered with black silicone. The black plastic tray can now be twisted back and forth, and the magnets don't move at all. And although the magnets are...