Results 1 to 10 of 42

Thread: My first scrubber!

Threaded View

  1. #1

    Join Date
    Mar 2012
    Location
    UK, Derby
    Posts
    27

    My first scrubber!

    Hi everyone,

    Great site, been reading about the scrubbers for over a week now and am very interested in going down this route to solve my nitrate/hair algae on rock issue using natural means.

    I'll start with a bit of background.

    Tank is a 5 x 2 x 2 with approx 55kg rock, sump with chaeto in 24/7 lit fuge. In addition I'm running carbon, skimmer and fluidised rowaphos. I like my fish so am in to the very well stocked side of things. I've always struggled with cyno in the 3.5 years of the tank being in existence and whilst the cyno went 6 months ago, this was replaced by hair algae and lots of it. So much so I've removed all corals except my nem and some hair mushrooms. I started experinmenting with vodka and sulfur reactor but to no satsifactory results which leads me to this site!

    Click image for larger version

Name:	P2270006.jpg
Views:	670
Size:	89.8 KB
ID:	1769Click image for larger version

Name:	P2270004.jpg
Views:	658
Size:	90.6 KB
ID:	1770Click image for larger version

Name:	P2270005.jpg
Views:	645
Size:	89.2 KB
ID:	1771

    2 weeks ago I did think I'd got my nitrates just about under control as these were reading 10. So I began a process of removing all the hair algae on the rocks (lights out and physical removal) as well as increasing the flow from powerheads (now 12000lph and 6000 lph in addition to reef flsuh system of theoretical 6000lph). This worked at a treat at removing the hair algae, unfortuntately what I didnt relasise was I hadnt solved the underlying nitrate problem and within a week nitrates were at >25. At this point, panic, increase light periods, cut back on feeding to get the algae to grow back on the rocks again!!!

    So here I am. Since I'm not a great DIYer, I started to prep my tank to take a scrubber as well as build my first one knowing full well it will need modification to get it where it should be. So last week was spent getting the sump unit ready to take a scrubber and yesterday was adding all the fixings and the scrubber itself.

    Current tank stats:

    Tank size: 5 x 2 x 2 with approx 55kg of rock. Estimated display capacity including rock displacement 450 litres
    Sump size 3 x 1.5 x 1.5 holding approx 100 litres
    Total system size c. 550 litres

    Nitrates currently at 25 (salifert)
    Phosphates registering very slight tinge of blue on salifert ie just above 0.00

    Feeding regime: large pinch of flake in the morning along with approx 15 pellets. In the evening 1 cube of frozen mysis supplemented with a couple of small pieces of prawn or mussell and approx 2" square of seaweed sheet.

    Current scrubber:

    Width (36cm) x length (30cm) using 7 count roughed up plastic canvas
    Lit on both sides with 20W spiral CFL (ie 2 light in total) with home made reflectors.
    Pump is rated at 1000lph but at the required head height I'm getting 456lph.

    Click image for larger version

Name:	P2270003.jpg
Views:	689
Size:	87.5 KB
ID:	1772Click image for larger version

Name:	P2270001.jpg
Views:	706
Size:	79.4 KB
ID:	1773Click image for larger version

Name:	P2270002.jpg
Views:	643
Size:	94.0 KB
ID:	1774

    Please can you advise optimum screen size and flow rates so i know whether I should keep pump and reduce screen size or keep screen about the same and get a new pump?

    Any feedback welcome!

    Thanks,

    Steve.
    Last edited by steve; 03-11-2012 at 04:29 AM. Reason: Photos attached

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts