Hi there...led gurus. This will be my first ever LED build. Would like to seek some advice first before I begin
I'm building a 2 cube/day scrubber using the 2 side high wattage technique. My screen size will be 6" x 4". After some calculation(correct me if I'm wrong) I've come up with the following configuration. Please advice which is the better option
6 x 3W 660nm LED (3 on each side)
or
6 x 3w 660nm + 2 x 3w 455nm (4 on each side)
not sure if the 2nd option would cause algae to burn. Please discuss and thank you!