Originally Posted by
ShanGo
the pump i am going to use does 3gal in 25 sec
3gal in 25 sec...
3/25 = 0.12 gal/sec
0.12 * 60 * 60 = 432 gal/hour
which means 432/35 = 12" of screen width.
screen area in inch squared should be the same as the volume of water in teh display (208)
so 208 square inches / 12" = 17" high
I would guess that the pump won't even do that once the screen is on, I'd recommend two of those pumps with two screens that are say 10" wide and 12" long (plus an inch or two to go into the pipe at the top), lit on both sides of each screen.