I have been lurking and reading for a few months now and am ready to take the plunge.
This is the 120 gal display with 40 gal breeder sump.
I have everything laid out and dry fitted. I just measured my flow rate at 234 gph through a 6.25" long cut. Cut made per recommendations.
According to the 35gph per inch I am right on the money and I do have the ability to tune the flow up just a bit and down as much as i want.
SO: 6" wide screen. NOW im a bit troubled..... I will feed to the ability of my scrubber. I would like to be able to increase my nutrient load significantly!
I have 14 660nm 3w deep red led and a driver ready to go. Minimum on my driver is 8 LED's so 4 LED to a side on a 6x6 screen.
6"x6" screen with 12W of LED per side at about 3" off of the screen.
3 cube a day scrubber?
Here she is ready for the screen and some final touches. The supply is my gravity return from the pump. Some of the water is diverted into the first chamber of the sump (refugium). If all goes as planed that refugium will be my future frag tank!!!!
Please let me know if you anticipate any issues.
All comments and suggestions welcomed and appreciated!!!!!