The thing with turning them down is that the outside of the screen is already low in light.
The thing with turning them down is that the outside of the screen is already low in light.
thank you for the comments.... the center of the screen is starting to grow over now..... THe outer edges are getting well developed growth of blck/brown sludge.
What is indicating that the outer edges are not receiving enough light?
They are dark.
i added cut diffuser to the inside of my scrubber box and turned the led back up to just below full power. The scrubber is on for 9 hrs a day now. This has been in place for just shy of a week.
This is what it is looking like now:
Side 1:
Side 2:
i am considering adding a RB to the center fo the lighting spread and spreading the LED's apart a bit to prevent them being so focued in the center of the scree.
Comments / suggestions appreciated!
O-yea, just put an ATS on my biocube!!!! info on that in the future
full scrubber shot:
I also had to add some splash shielding to prevent salt creep on my LED's
Let it go 14 days. Really need to spread the light out.
light is spread out and added a RB to each side. updates to come.
Side 1
Side 2
After cleaning:
This is 9 days growth with the addition of one RB led to each side and spreading out of the Red LED's. I hope i did not overclean. I was very impressed with how much algae came off of the screen!
I intened to clean it again after 7 days unless the growth is still sparce. I am running the scrubber 9 hours still.
I have seen no ill affects on my chaeto. It is still growing and dark green. Waiting for it to stop growing before I remove it all togeather. I want to avaoid any drastic changes to the tank.
Comments and suggestions appreciated!
14 days...
14 it shall be!
I have an emergency overflow built in and i noticed an increas in flow. I believe i will have to shade my slot a bit to keep the growth from clogging.
thank you for the feedback
There are currently 1 users browsing this thread. (0 members and 1 guests)