+ Reply to Thread
Results 1 to 9 of 9

Thread: New led bulbs

  1. #1

    Join Date
    Apr 2010
    Location
    USA
    Posts
    79

    New led bulbs

    Hi I just recently bought these bulbs from ebay and they don't seem to be working??

    http://www.ebay.com/itm/130766100603...84.m1439.l2649

    Now my nitrates are 80ppm!!! I was using 4 cfl's that were work great but now the algae doesn't seem to be growing that much. The 2 new led bulbs have been on there for a week or two. A couple of fish have died recently also. Should I get more bulbs or should I get different ones? Please help!!

  2. #2
    kotlec's Avatar
    Join Date
    Nov 2010
    Location
    Lithuania
    Posts
    710
    How far bulb is from screen.
    There are very small LEDs used in this bulb. Should place it as close to screen as possible.

    Another possible reason for not working is bad spectrum regardless of what is stated, what is common for most chinese production. They say that only one third of bulb power is in 660nM range. If that wavelength is true at all , you have max 5.5w off needed color light. Consider blue as supplemental and orange as waste.

  3. #3

    Join Date
    Apr 2010
    Location
    USA
    Posts
    79
    They are very close 2-4 inches away. So your saying these bulbs are junk?

  4. #4
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,688
    Going by watts: 2 X 16 = 32 total LED watts = 64 CFL watts = 64 square inch screen = 8 X 8 inches.

    Is your screen 8 X 8 inches? How many hours a day?

  5. #5

    Join Date
    Dec 2011
    Location
    USA
    Posts
    160
    way underpowered light source for a scrubber

    each individual LED is 16Watts/168 = which although works as a diffused light source for something like reading, it doesn't give you enough light energy to grow anything.

    I tried something similar early in my experiements with scrubbers.

    In my experience, I have found you need at least 1 Watt individual LED's in any array, preferably 3 Watts to get the right intensity.

    If you are losing fish, I would check your water parameters and do a water change. An increase in Ammonia probably is what caused this. Do you have live rock, a sand bed? What are you using to keep Ammonia and Nitrite under control? Has your tank cycled?

    The scrubber reduces Nitrates and Phosphate. If the scrubber stops working you get a Nitrate spike, but this should not have a major effect on fish.

    Something else is causing your problems.

  6. #6

    Join Date
    Apr 2010
    Location
    USA
    Posts
    79
    The screen is 10x10

  7. #7

    Join Date
    Apr 2010
    Location
    USA
    Posts
    79
    I've had the tank up for 4 1/2 years now. And have a lot of live rock and live sand. I thought the scrubber would take out the nitrates, nitrites and ammonia from the water. I've also did two water changes today a 16g and an 18g and the nitrates are still reading off the charts. And I put 4 new cfl's on the screen yesterday.....

  8. #8
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,688
    Waterchanges won't help.

    If the screen grows, your N should come down. Post pics in 14 days.

  9. #9
    Banned
    Join Date
    Aug 2010
    Location
    USA
    Posts
    2,710
    Way, way too low wattage for a screen that size. Low power LEDs are completely inadequate to begin with. If your nutrients are off the charts after just a few weeks, something else is going on here though. I would go back to CFLs and plan a better LED fixture

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts