Wow, where to begin? After I did that water change a while back, the scrubber started growing in again. More recently, like a month ago, I started dosing nitrate as my phosphates seemed to be getting high, I was getting some cyano on the sand and a bit on the rocks. The dosing worked, the scrubber took off and so did the skimmer (I have bio cubes in). Anyways, about 10 days ago I changed tanks and sumps, lost a couple colonies in the move but I am happy with the results. The new tanks sit on the same stand, but the display is 24x15x16 (14" water height, same as before) ~20 gallons, and the sump is 20.75x15x12 with 10.75" of water in it, about 15 gallons.
So the new setup didn't have a built in upflow scrubber, as I don't feel they work as well as the waterfall type, after some extensive testing with a LFS. I built today a HOB waterfall scrubber that will mount on the back of the sump. I'll drive it with a MJ1200 I have laying around. Basically the same 6x6" screen, although it'll be more like 5.5x6.
Can I have the thread moved now that the tank no longer uses an upflow scrubber, or should I start a new one?
FTS.. Don't have a whole system shot, but the sump sits on the stand just below the display and also has an LED light.