+ Reply to Thread
Results 1 to 2 of 2

Thread: Phosphate flow out of rocks

  1. #1
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,674

    Phosphate flow out of rocks

    Phosphate flow out of rocks

    Many people, when they get their scrubber running for the first time, get worried when more (not less) algae starts to grow on their rocks. It seems really strange, especially when nitrate and phosphate tests have been lower than before. What is happening is that phosphate is coming out of the rocks. Remember, phosphate is invisible, so you can only see the effects of it, and it always "flows" from higher concentrations to lower concentrations (just like heat does).

    Example: If your room is warm, and you put a cold object on the floor, heat from the air in the room will "flow" into the object until the object and the air are the same temperature. Example 2: If you put a hot object on the floor, heat will "flow" out of the object and go into the air in the room, again, until the air and the object are the same temperature. Now suppose you open your windows (in the winter). The warm air in your room will go out the windows, and it will get colder in the room. The object on the floor is now warmer than the air, so heat will flow out of the object and into the air, and then out the window.

    Think of phosphate as the heat, and your rocks as the object, and your windows as the scrubber. As the scrubber pulls phosphate out of the water, the phosphate level in the water drops. Now, since the phosphate level in the water is lower than the phosphate level in the rocks, phosphate flows from the rocks into the water, and then from the water into the scrubber. This continues until the phosphate levels in the rocks and water are level again. And remember, you can't see this invisible flow. It's like a fast flowing, but shallow, river. And it can be much more phosphate than how much you are feeding each day.

    This flow causes an interesting thing to happen. As the phosphate comes out of the rocks, it then becomes available to feed algae as soon as the phosphate reaches the surface of the rocks where there is light. So, since the surface of the rocks is rough and has light, it starts growing MORE algae there (not less) as the phosphate comes out of the rocks. This is a pretty amazing thing to see for the first time, because if you did not know what was happening you would probably think that the algae in the scrubber was leaking out and attaching to your rocks. Here are the signs of phosphate coming out of the rocks:

    1. The rocks are older, and have slowly developed algae problems in the past year.

    2. The scrubber is new, maybe only a few months old, and has recently started to grow a lot; possibly dark and thick.

    3. Nitrate and phosphate measurements in the water are low, usually the lowest they have been in a long time.

    4. Green hair algae (not brown) on the rocks has increased in certain spots, usually on corners and protrusions at the top.

    5. The glass has not needed cleaning as much.


    Since skimmers, filter socks, etc don't remove any nitrate and phosphate, and waterchanges and macro's in a fuge don't remove much either, most people have never seen the effects of large amounts of phosphate coming out of the rocks quickly. But sure enough, it can with a scrubber. How long does it continue? For 2 months to 6 months, depending on how much phosphate is in the rocks, how strong your scrubber(s) is, and how many other phosphate-removing filters you have (GFO, carbon dosing, etc). But one day you will see patches of white rock that were covered in green hair the day before; this is a sure sign that the algae are losing their phosphate supply from the rocks and can no longer hold on. Now it's just a matter of days before the rocks are clear.
    Last edited by SantaMonica; 09-09-2017 at 01:21 PM.

  2. #2
    kotlec's Avatar
    Join Date
    Nov 2010
    Location
    Lithuania
    Posts
    710
    There is one more point of view that I have read recently . Glenn (inventor of DSR method ) has not changed water in his marvelous tank for 8 years. So there something common with our system. And there how he explains PO4.

    Quote Originally Posted by Glennf;
    PO4 behaviour in our reef system

    Excess PO4 is being precipitated with Cations like Ca, Mg, K, Na into for example Ca3(PO4)2 and cumulate into you LR and substrate.
    When the conditions changes the PO4 can be release into the system again. (e.g. acid surroundings)
    So after a long time with extreme low PO4 levels it seems all PO4 dosing are being absorbed very quick into the system, only to suddenly overshoot when dosing. Now you know why you should be careful when dosing PO4 continuously.

    The other way around when you have had a long period of high phosphate levels, lowering phosphate take a lot time because the precipitated phosphate leak back into the water.
    There might even be a slight (measurable) increase Ca,Mg,Kalium level because of released cations.
    skimming can be controlled by adding or removing its function
    when you are to low on PO4 and NO3 and you need additional dosing, there is no need to skim off nutrient you need for you corals, so you throw out the skimmer.
    On the other hand if you have high PO4 and NO3 and the corals are not using enough nutrient. You need to export the excess bacteria mass otherwise carbon dosing will not work either. (the bacteria will die, releasing the absorbed PO4 and NO3 again.)
    Exporting excess bacteria mass must be done with a good working skimmer.
    Dont be surprised. He actually is dosing his tank with P to keep it at low but stable point.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts