+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: SURF2 - Cyprus

  1. #1

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17

    SURF2 - Cyprus

    Hi All,

    I have ordered a SURF2 and had it delivered with no issues in Cyprus.

    My tank is 160(L) x 65(W) x 60(H) with a 150 litre (approx.) sump. Fish only with live rock at the momment.

    I have around 70 - 75kg of Fiji and Indonesian live rock in the DT and around 10kg of live rock rubble in my sump.

    At the moment i use an Aquamedic turboflotor 3000 skimmer and a SURF2.

    I have used in the past other forms of algae scrubbers with a lot of short time success.

    I could not have continues and long success as my main issue was the safety of all my DIY setups and electricity cost out of all those bulbs – electricity cost in Cyprus is very high.

    After a major electricity disaster here in Cyprus back in 2013 (Electricity station Explosion) I have removed all burned equipment from my tank and left the tank to God’s mercy (i.e. with no form of any filtration apart from the live rock).

    Recently, I gave a good clean to the dt and the sump and also did a 150lts water change. All seems doing well now.

    The SURF2 was added on the 21st March 2014 and the light is on a timer for 18 hours a day – as per the instructions manual.

    The development will follow.
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	unnamed11.jpg‎
Views:	430
Size:	34.7 KB
ID:	5224   Click image for larger version

Name:	unnamed22.jpg‎
Views:	419
Size:	37.9 KB
ID:	5225   Click image for larger version

Name:	unnamed44.jpg‎
Views:	404
Size:	52.0 KB
ID:	5226   Click image for larger version

Name:	unnamed33.jpg‎
Views:	403
Size:	33.1 KB
ID:	5223  

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,576
    Welcome from Cypress.

    Sorry to hear about the electricity station problem. Glad that your tank survived. The live rock will filter ok for a few weeks, as it absorbs phosphate. Once your SURF2 grows, however, the phosphate will be pulled out of the rocks.

    Will be looking forward to the progress.

  3. #3

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17
    Hi SM,

    Can i put longer air tubes? Will this affect in any way the oparation?

    What about the photo period i set, is it ok the 18hrs cycle?

  4. #4
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,576
    Longer tubes are fine.

    18 hours is good.

  5. #5

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17
    Thanks man.

    No signs of any green or even yellowish yet.

    Keep scrubbing!!

  6. #6

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17
    Hi guys,

    I am getting worried as no signs growth is visible yet, nothing at all.

    Any tips? Reduce or increase the photoperiod. ATM is 18hrs per day.

  7. #7
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,576
    A picture of the inside would help. But I think you need to cover the light with a cloth.

  8. #8

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17
    Click image for larger version

Name:	20140403_080547.jpg
Views:	325
Size:	96.0 KB
ID:	5258
    Click image for larger version

Name:	20140403_080554.jpg
Views:	316
Size:	96.7 KB
ID:	5259

  9. #9
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,576
    Are you sure the light goes on?

    Cover the light with a towel to make it less.

  10. #10

    Join Date
    Mar 2014
    Location
    Cyprus
    Posts
    17
    Hi SM,

    Yes, the light definitely goes on, 18hrs per day since the 21st March.

    Does it matter that it is located on the last part of the sump where the 2 return pumps are working?

    Any tip to encourage growth?

+ Reply to Thread
Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts