+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: HOG3

  1. #21
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This anemone tank has a HOG3 or 3x or 3xx on the front of the chaeto compartment in the sump. The light is from the chaeto light, hanging above the sump.

    Click image for larger version

Name:	UasLazy_ReeferOnIG-1.jpg
Views:	955
Size:	39.1 KB
ID:	8273

  2. #22
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    Feed your fish from your scrubber.

    Free, fresh, and does not add nitrate or phosphate to the water like normal feeding does.


  3. #23
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    Green and red Holiday colors in this HOG3 scrubber in the middle section of a saltwater sump. Big growth in a small space.

    Click image for larger version

Name:	UasCraigH-1.jpg
Views:	883
Size:	80.7 KB
ID:	8373

  4. #24
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This is probably a HOG3, overgrown whith mostly Ulva Fasciata.

    Click image for larger version

Name:	UasUltimateMJ-1onR2R.jpg
Views:	839
Size:	93.0 KB
ID:	8420

  5. #25
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This HOG3 or 3x or 3xx from saltwater shows very dark slime growth in the middle, and cyano on the lower outer parts. This is probably a HOG3, which has most of the light in the middle, and less light on the outer areas, because cyano grows in a scrubber usually only if light is low, when nutrients are high. This combination of cyano and green slime holds a lot of nutrinets, but must be brushed out more often because it does not hold on well, although the Green Grabber® rocky walls are doing the best it can (a regular waterfall screen could not hold on to any of this).

    Click image for larger version

Name:	UasJoshDotson-1.jpg
Views:	858
Size:	99.8 KB
ID:	8463

  6. #26
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This is the wet side of a HOG3 or 3x or 3xx taken out of saltwater. Almost can't tell which end is up, except for the air tubing on the right side, which is up, which means the bubbler is on the left, which is down.

    First, this should have been cleaned/harvested much sooner, because when it gets this thick (about 2 inches) the light can't reach the bottom layers as well, and those layers start dying. The extra light in the 3x and 3xx reach deeper, but still get shaded eventually.

    Second, the yellow in the middle is from lack of iron/nutrients, because:

    1. The thick growth blocks bubbles from flowing through, thus reducing nutrients to the growth.
    2. The thick growth is pushing up agaist the glass, which is nearest to the light, so it gets more light than it needs.
    3. The thick growth blocks/covers the water circulation holes in the case, further reducing nutrients getting to the growth.

    So for max filtering and nutrient reduction in the tank, this scrubber should probably be cleaned/harvested or fed to the fish every 5 days or so, and when doing so the entire inside of the case should be brushed with a brush in a sink with running tap water to kill the pods.

    However if the goal is to just grow pods for the fish, you don't have to clean/harvest at all. Just let it run, and pods will grow and come out of the holes to feed the fish. Maybe you'll need to unclog the circulation holes a bit. Or you could modify them larger, say 1/4" diameter.

    Or if the goal is to grow algae to feed to the fish, then you just open the case and let the fish swim in and eat overnight, then put it back into operation for another week.

    Click image for larger version

Name:	UasLorenzoWashington-1.jpg
Views:	805
Size:	50.0 KB
ID:	8534

  7. #27
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    Here is an old BRS post of I think was a HOG3

    Click image for larger version

Name:	UasBrs-1.jpg
Views:	826
Size:	41.2 KB
ID:	8536

  8. #28
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This HOG3 or 3x or 3xx wet-side looks fairly new, and is still filling in


    Click image for larger version

Name:	UasIdadav_9mnox6a-1onEbay.jpg
Views:	824
Size:	58.0 KB
ID:	8545





    #algaereactor
    #algaescrubber
    #ats
    #ballingmethod
    #biopellets
    #bulkreefsupply
    #canisterfilter
    #carbondosing
    #chaeto
    #chaetomorpha
    #chaetoreactor
    #coralvue
    #fleecefilter
    #fluconazole
    #freshwateraquarium
    #gfo
    #nitrate
    #phosphate
    #pelletreactor
    #plantedtank
    #premiumaquatics
    #proteinskimmer
    #reef2reef
    #reeftank
    #refugium
    #rollfilter
    #saltwatertank
    #tritonmethod
    #turfscrubber
    #zeovit

  9. #29
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    This is probably a HOG3 scrubber® or larger. Can't see the strings, but it would be difficult for a model without strings to hold on to this much growth in saltwater. Even the stronger light in this model is having trouble cutting through the growth to get to the back wall, and thus the growth on the back is darker. So in addition to cleaning off the circulation holes more often, the light should be run 24 hours in this case, and cleaned every 5 days or so, including brushing the Green Grabber® back wall with a toothbrush in a sink, so you see the white again. And of course don't forget to clean the glass before re-attaching the HOG to it.

    Or, just put the whole things into the display overnight for the fish to eat.

    Click image for larger version

Name:	UasJustinSwinney-3.jpg
Views:	806
Size:	91.4 KB
ID:	8569

  10. #30
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,679
    Not spaghetti and meat sauce. Looks like a modified HOG3 or 3x or 3xx scrubber that needed brushing out (in a sink) a week ago. Slime it still good though...
    http://algaescrubber.net/forums/show...he-best-filter

    Click image for larger version

Name:	UasVincentChitel-2.jpg
Views:	782
Size:	78.2 KB
ID:	8669

+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts