+ Reply to Thread
Page 1 of 8 12345678 LastLast
Results 1 to 10 of 74

Thread: Fresh water algae scrubber/filtration

  1. #1

    Join Date
    May 2016
    Location
    usa
    Posts
    123

    Fresh water algae scrubber/filtration

    Is any one using an algae scrubber and mechanical filtration only on a fresh water tank.

  2. #2

    Join Date
    Jan 2015
    Location
    USA
    Posts
    96
    I ran a fresh water tank with no filtration other than algae and gravel. Ammonia, nitrate, and nitrite were all undetectable, but mechanical filtration, it's not effective. Beyond not really capturing anything mechanical, small pieces of algae will break off the screen and enter the tank/sump. Especially when you clean the screen. My second scrubber I placed filter floss down stream of the scrubber. I don't run the floss all the time, usually only a day or two a week to polish the water.

  3. #3

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    I am considering using a 90 gallon, 4' x 20" x 20" as a sump, and baby fry nursery, for a 75 gal, over stocked, and well fed african mbuna tank.
    It will be a DIY. I was thinking of a fluidised sand filter, as a back up, too a large waterfall algae scrubber. I am thinking it would absorb most of the ammonia before it could convert into nitrate.
    Currently my water goes through a bioball W/D before it goes to the scrubber. My current set up mostly limits my fry space. Also a green algae scrubber could provide a lot of copods, waterfleas. The fry could feed on.

  4. #4

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    New question.
    Will a scrubber work best before any bio media? I have a potential location for a 8" x 20" flat river scrubber with 600 gph flow. I think I need 4xx more light.
    I am mostly curious as to the pre or post, biofilter, feeding it ammonia, vs nitrate.

  5. #5
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,565
    Should not matter where anything goes.

  6. #6

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    Click image for larger version

Name:	20160625_103847.jpg
Views:	919
Size:	101.9 KB
ID:	6622 starting out with a well cleaned screen. I like the fact that the scrubber grows 100+ daphnia, copods, with each cleaning. I don't know how the hold out in a waterfall. They do.

  7. #7

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    Click image for larger version

Name:	20160627_160107.jpg
Views:	904
Size:	106.1 KB
ID:	6623
    48 hours of growth. Nitrates have gone up to 30 ppm since I cleaned it.

  8. #8
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,565
    Let it get get real thick this time.

  9. #9

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    I hope too. I felt it was still growing a CFL started non green algae.Click image for larger version

Name:	20160625_103406.jpg
Views:	720
Size:	102.6 KB
ID:	6624
    Before I gave it a good hard scrub, the green spot was the center of the old cfl.

  10. #10

    Join Date
    May 2016
    Location
    usa
    Posts
    123
    Click image for larger version

Name:	20160630_154724.jpg
Views:	580
Size:	102.1 KB
ID:	6627
    The bare spot was 2" from a light, rearanged light spread, and doubled the water flow. Added more air, also as scrubber is inside a wet dry sump with a lid.
    I have an ufs on my top tank, it seams to be greener and going better than the wfs, the wfs has a huge bio load vs the ufs.

+ Reply to Thread
Page 1 of 8 12345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts