Welcome from Mexico.
1500cc per minute = 1.5 lpm so it should be ok.
Looks like you have 12 LEDs, so they are probably 1 watt each. If so you can start with those.
Ok if you run them with 500ma then they should not be too much.
My driver its 1000ma i dont have more can i use just 6? 4? 2? Leds
You will need to operate them in parallel: a series of 6 leds, in parallel with the other series of 6 leds. This will give 500ma to each led.
Sounds like a good start.
There are currently 1 users browsing this thread. (0 members and 1 guests)