+ Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 10 of 36

Thread: Drop 1.2x question

  1. #1

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21

    Drop 1.2x question

    Hello I have a 40 gallon aio tank. I run tunze 9004 skimmer drop 1.2x scrubber and purigen. Thats all. I have 8 fish. Algae scrubber is in for 7 days and it is clean as new. 12 hrs light schedule 24 hrs bubbles. Black screen is being used. . I was away for 4 days so I had auto feeder for pellets twice a day. I left a huge nori piece before I left. When I came back glass was covered in green slime algae with some white dots. Phos went from 0 to 0.26 nitrate from 8 to 16.
    Shall I continue like this or make a change to start the algae scrubber? My tank is 3 months old. Rocks are covered with lush green color no hair algae.
    Phos and nitrate is no where near where I would like to operate. Normally i ran nopox but because I was away no nopox. I thought it would help to jump start the scrubber but nothing on it.

    Appreciate any comments to help start the scrubber. Tomorrow I am planning to start on nopox again.

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,674
    Welcome.

    Don't start the nopox yet. Lets see the scrubber and rock pics.

  3. #3

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21
    Click image for larger version

Name:	IMG_0926.jpg
Views:	424
Size:	87.9 KB
ID:	7245

    Click image for larger version

Name:	IMG_0927.jpg
Views:	418
Size:	83.3 KB
ID:	7246Click image for larger version

Name:	IMG_0928.jpg
Views:	432
Size:	87.4 KB
ID:	7247Click image for larger version

Name:	IMG_0928.jpg
Views:	432
Size:	87.4 KB
ID:	7247

    I actually just noticed a lish green spec on the algae scrubber. But everything else is super white

  4. #4

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21
    My concern is while I remove all of the chemical remedies against phos and nitrate in the tank to get scrubber to start parameters will continute to increase. Is that ok?

  5. #5
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,674
    Rocks don't have any periphyton yet. Is still very new. Once periphyton covers the rocks it will do a lot of the filtering.

    Scrubber will be slow to start since the rocks are new. Just let everything fill in naturally, like a reef. In another week the scrubber will have something to see.

  6. #6

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21
    what is the green stuff on the rocks. Is it peripython?

    How about the role of carbon? Do I need to use carbon or purigen? or completely take out all the chemicals?

  7. #7
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,674
    You should not need any carbon unless you are trying to remove medications.

    Periphyton is what turns your rocks different colors. You know... the white rocks you started with in SW, or the grey rocks (or brown wood) you started with in FW. After several months or years, the rocks become a variety of different colors and textures. Why? Because the periphyton that has grown on it is a mix of different living things, of different colors, and thicknesses. And the important part is: It is LIVING. And the thicker it is, the more natural it is.

    That's right: The colored stuff that has coated your rocks is all living organisms. Sponges, microbes, algae, cyano, biofilms, and of course coralline. After all, "peri" means "around the outside", and "phyto" means "plant". Ever slipped while walking on rocks in a stream? That's probably periphyton that made it slippery. It's a very thin coating on the rocks, sometimes paper thin.

    There is a lot of photosynthetic organisms in periphyton, and this of course means that they need light; but they need nutrients too (ammonia, nitrate, phosphate). And as you might figure, they will be on the illuminated portions of the rocks. And they will grow to intercept food particles in the water, based on the water flow. Just think about how sponges orient their holes for water flow; the micro sponges in periphyton do it too but on a tiny scale.

    What about under the rocks, in the dark areas? Well these periphyton don't get light, so they are primarily filter feeders. So they REALLY grow and position themselves to be able to intercept food particles. And they don't really need to fight off algae, because algae does not grow in the dark, so they have no need for anti-algae tactics like periphyton in illuminated areas has.

    Reef studies have shown that at certain depths, more of the filtering of the water comes from periphyton and benthic algae than comes from the phytoplankton which filters the deeper water. And in streams, almost all the filtering is done by periphyton. So, what you have on rocks that are "mature" or "established" is a well-developed layer of periphyton; and all the things that comes from it.

    This is why mandarin fish can eat directly off the rocks of an "established" tank (tons of pods grow in and consume the periphyton), but not on the rocks of a new tank. Or why some animals can lay their eggs on established rocks, but not new ones. Or why established tanks seem to "yo-yo" less than new ones. Even tangs can eat periphyton directly when it's thick enough. Yes periphyton can also develop on the sand, but since the sand is moved around so much, the periphyton does not get visible like it does on rocks. So thick periphyton on established rocks is your friend. And totally natural too. That's why there are no pure white rocks in reefs. Keep in mind though I'm not referring to nuisance algae on rocks; I'm only referring to the very-thin layer of coloring that coats the rocks.

    But what happens when you "scrub the stuff off your rocks"? Well you remove some of the periphyton, which means you remove some of your natural filter and food producer. What if you take the rocks out of the water and scrub them? Well now you not only remove more of your natural filter and food producer, but the air is going to kill even more of the microscopic sponges in it. And what if you bleach the rocks? Well, goodbye all filtering and food producing for another year. It's an instant reduction of the natural filtering that the periphyton was providing.

    However, what if you just re-arrange the rocks? Well, some of the periphyton that was in the light, now will be in the dark; so this part will die. And some of the periphyton that was in the dark will now be in the light, so it will not be able to out-compete photosynthetic growth and thus will be covered and die too, for a while anyway. And even if the light stays the same, the direction and amount of water flow (and food particles) will change; sponges that were oriented to get food particles from one direction will now starve. So since the light and food supply is cut off, the filtering that the periphyton was providing stops almost immediately, due only to your re-arranging of the rocks.

    Starvation takes a little longer. The periphyton organisms won't die immediately, since they have some energy saved up; but instead, they will wither away over several weeks. So on top of the instant reduction in filtering that you get by just moving the rocks, you get a somewhat stretched-out period of nutrients going back into the water. And after all this, it takes another long period of time for the periphyton to build up to the levels it was at before: 1 to 2 years. Even changing the direction of a powerhead will affect the food particle supply in the area it used to be pointed at.

    So a good idea is to try to keep everything the same. Pick your lighting, flow, layout, and try to never move or change anything. In other words, just like the rocks on a reef. It's a different way of thinking, but you should have a stronger natural filter and food producer because of it.

  8. #8

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21
    thanks for the write up. I actually read this article before. But I was curious what is the relationship between algae scrubber vs peripython? do they work together ? do they work against each other? Can you not have algae without the peripython or vice versa.

    Thanks.

  9. #9

    Join Date
    Aug 2017
    Location
    Usa
    Posts
    21
    Update. Today Checked the scrubber and there were like 15 spots that havealgae starting. Very nice it means itsworking

  10. #10
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,674
    They are very similar. Except periphyton is available for constant consumption. If you have no rocks, you will have very little periphyton

    Good to see the growth starting.

+ Reply to Thread
Page 1 of 4 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts