+ Reply to Thread
Results 1 to 2 of 2

Thread: The Super Guide to Algae Turf Scrubbers

  1. #1
    Super Moderator
    Join Date
    Oct 2008
    Santa Monica, CA, USA

    The Super Guide to Algae Turf Scrubbers

    The Super Guide to Algae Turf Scrubbers

    Part 1

    Filtering your tank by using "algae to fight algae" has been gaining in popularity in the last few years. We are biased about this, because we invented the waterfall and upflow designs that everyone uses now, but nevertheless we wanted to make this in-depth series about everything, including:

    ∑ History of scrubbers
    ∑ DIY topics
    ∑ Commercial models
    ∑ Comparison to other filters
    ∑ Usage with other filters
    ∑ Sizing
    ∑ Lighting
    ∑ Water flow
    ∑ Operation
    ∑ Fresh vs. Saltwater
    ∑ Effects on animals
    ∑ Troubleshooting
    ∑ Dosing
    ∑ Types of algae
    ∑ Results in tank
    ∑ Uses of algae
    ∑ Safety

    First, the origin of scrubbers should be mentioned. It was Dr. Walter Adey of the Smithsonian Institution in the USA who really got the scrubber concept going in the 1970's, when he was investigating nutrients and corallines on reefs:

    Click image for larger version

Name:	walter-adey-text.jpg
Views:	68
Size:	92.1 KB
ID:	7736

    His nutrient measurements confirmed what other researchers had found, which is that nutrients basically "stay on the reef" and do not flow out into the ocean, even though the water itself flows out into the ocean. It was already known back then that reefs are both generators and consumers of nutrients, consuming any nutrients as soon as they were available (thus making reef water "nutrient poor"), but he wanted to investigate further into who generated and consumed what, and by how much. He started publishing many reef nutrient studies, and came out with the first edition (now in third edition) of his Dynamic Aquaria book which describes in great detail about nutrient flow in reefs, corals, algae and animals:

    Click image for larger version

Name:	Adey Dynamic Aquaria cover.jpg
Views:	62
Size:	43.4 KB
ID:	7737

    Adey's big contribution to the aquarium community was in the separation of the nutrient generators from the nutrient consumers. The generators are the animals, micro creatures, and bacteria that all generate ammonia, whereas the consumers are the algae which consume this ammonia. On reefs this is all intermixed, and it keeps nutrients inside the reef, but he separated out the algae and created a device which mimics the environment where the most biomass of algae grew the fastest: where waves crash down on rocks. As soon as you scraped algae off of these rocks, it could be fully regrown in just 24 hours, and that's even while teams of herbivores were eating it. This could be a 100x increase in biomass in 24 hours, which absorbs a tremendous amount of nutrients from the water.

    Click image for larger version

Name:	waves rock growth.jpg
Views:	65
Size:	98.5 KB
ID:	7738

    His device in 1980 used a dumping bucket to pour water onto a very shallow screen, and thus made a bubbling turbulent air/water interface that grew a lot of biomass of algae fast, and he called this device a "turf scrubber" because it grew a turf algae and it scrubbed (removed) nutrients from the water. By separating the nutrient producers from the nutrient consumers, the conditions for operation of the consumers can be controlled and optimized without changing the conditions for the rest of the reef (aquarium) itself.

    Click image for larger version

Name:	Adey dump buckets ats.jpg
Views:	63
Size:	32.7 KB
ID:	7739

    Adey licensed the design to someone to have some small models made, but nobody ever really sold many of these dumping bucket designs because they were so big, complex, splashy and noisy, and also they were just 1-sided (top side) only which grows less. Also, Adey never had any interest in making or selling them himself, so they disappeared.
    Later in the 1990's a few people made and sold the simple horizontal river design, like the Aquaricare scrubber which had little baffles to stir up the water and create a more turbulent air/water interface (the light on top is removed for the photo). But it too was large, splashy, hazardous (used high voltage T5 bulbs and wiring), and was also just 1-sided (top side) which meant it had to be larger to make up for less dense growth.

    Click image for larger version

Name:	aquaricare scrubber.jpg
Views:	67
Size:	70.9 KB
ID:	7740

    Then in the 2000's the last "different" version of an algae scrubber was introduced, the Eco-Wheel. This was a giant, expensive, complex rotating machine that did work, but no known installation pictures have been found; just this small photo from a sales ad:

    Click image for larger version

Name:	eco wheel.jpg
Views:	70
Size:	79.3 KB
ID:	7741

    And so, up until 2007 the basic algae scrubber designs were the dump bucket, horizontal river, and rotating wheel. And none were really being sold, so nobody knew about them.
    Then came "SantaMonica" (us!) on the forums in 2007, with the first waterfall style scrubber. The thinking was that there must be an easier way to get a turbulent air/water interface on a screen than using a bucket, a wheel, or a river. Let gravity do the work straight down! And a waterfall on a screen could have lights and growth on both sides, so it would grow more and could be half the size. This first waterfall was put into a bucket on a sink in the office, complete with dangerous CFL bulbs that got shorted by salt spray. This was all posted on various forums as "Waterfall Turf Algea Filter: CHEAP and EASY to build" if you want to read it.

    Click image for larger version

Name:	bucket.jpg
Views:	72
Size:	23.3 KB
ID:	7742

    It grew great, and brought nutrients down to zero with no water changes. But in order to get a waterfall in to our sump area it would have to be low-profile, so a custom acrylic box was made and the SantaMonica100 was born (100 was for 100 gallons)..

    This was the first model to sell any real amounts. But it had flaws which caused it to be left behind in favor of our modern versions. First, it could not reliably be mounted anywhere but over a sump, because a clogged drain would cause an overflow onto the floor, or a clogged slot would cause water shooting out the top, even with a lid. Second, the cleaning/harvesting process was very involved, requiring water shutoff and disassembly of some plumbing or even taking the whole scrubber out. Third, the acrylic was fragile and easily cracked, especially after many heating/cooling cycles. And lastly, the high voltage 240/120 volt metal-case lights were dangerous for non-DIY users who just wanted a safe product. The lights would slowly corrode in the salty environment, and eventually short out.
    And so there you have it; the evolution of the algae turf scrubber from the 1970's to today. We'll get into many other topics, but for now will just link to one of our smaller modern models, the HOG1, which is a great "starter" scrubber.


    Click image for larger version

Name:	hog modern model.jpg
Views:	64
Size:	60.1 KB
ID:	7743

  2. #2
    Super Moderator
    Join Date
    Oct 2008
    Santa Monica, CA, USA
    The Super Guide to Algae Turf Scrubbers: Part 2

    By Santa Monica Filtration

    Now letís get into the first question that most aquarium folks have about scrubbers: Should you buy or build? Before the year 2010 there were not really any options to buy, but now you can buy tiny to medium size scrubbers in the upflow style, or medium to large sizes in the waterfall styles. And for building DIY, discussion forums now have examples of every attempted scrubber ever thought of, complete with growth examples and nutrient measurements over time. There are some really amazing builds that have been done. We wonít get into DIY plans here though because there are so many available elsewhere, such as our AlgaeScrubber.Net forum that goes back to the very first builds in the year 2008.

    An algae scrubber can be made DIY fairly easily if you are good with building. The typical materials of pvc pipe, acrylic sheet, glue, airline, etc are needed, just as if you are building a DIY reactor, overflow, or sump. One difference with scrubbers however, which makes them a bit more difficult, is the lighting thatís needed for the growth. Not only are you now dealing with electricity, but unlike DIY display lights which are above the tank in a dry air environment that you rarely touch, the lighting for a scrubber is in a humid or wet environment (or even underwater) that you touch daily, with wet algae dropping on top of it, all while possibly standing on a wet floor (maybe even with bare feet). So donít make a complex algae scrubber your first-ever DIY project.

    Some advantages of buying a scrubber are that you obviously donít need the time or space to build one. But other reasons are that itís hard to DIY some types of scrubber designs, even if you are good with DIY. Things like underwater lights for upflow scrubbers, or gravel-epoxy surfaces for algal attachment, or the long slot in a waterfall pipe, takes a few tries to get it right (meaning your first try will probably not work).

    Buying a pre-built unit, however, is limited to what is for sale. Currently the only models available are waterfalls (which we invented in 2008 and are now made by us and others) and upflows (only made by us), and these are in certain sizes only. There are a very few number of horizontal river models, but these are from China, are tiny, and are without any lights. And there are no dumping bucket designs available at all, probably because of their complexity.

    The big advantage of DIY is of course money; most $300 USD commercial models can be DIYíd in a week for $60 in parts, and most of this is probably for the lights. But DIY also lets you choose the exact style, size, and layout you want to fit into your exact space. If you need a very large model, such as for small exhibits at public aquariums, you will have to DIY.

    DIY waterfall styles are generally going to need some acrylic or plastic gluing, unless you can find the proper size plastic box to start with. Cutting the slot in the waterfall pipe is the hardest part, and although it can be done with a Dremel moto-tool cutoff wheel, most people end up doing it over again with a table saw, router, or other shop equipment. The lights are easy however; usually the low cost Chinese plant-grow lights can be used from Ebay, as long as you follow the safety steps such as shown in LEDsafety.org properly. Most DIY folks can do the pvc pipes, so thatís not a problem. Waterfalls are not really suitable for freshwater, however, because the growth gets long and clogs drains and pumps. Also, waterfalls work best when placed over a sump; not externally on their own, because they can overflow, leak, and also drip from the waterfall pipe.

    DIY bubbling upflow styles can be the easiest, if they are similar to the Hang-On-Glassģ styles that we make. These styles need no acrylic gluing or pvc pipe, and the LED lights just stick to a plastic cover on the outside of the sump or tank wall using magnets or suction cups. And the airline tubing for the bubbles is as easy as a goldfish tank. Cheap LED lights and a power supply from Ebay will do because they stay dry and are low voltage (no 240/120 volts at the light). These designs might be suitable for first DIY projects if you can get help with the lights, and are great for freshwater too because the long growth is kept mostly inside the growth compartment. Lastly, they canít overflow, leak, or drip because they are already underwater.

    DIY horizontal rivers are relatively easy to build; at least the river water part is. But again, the lighting can be a challenge over the long narrow pathway. One workaround for this is to put it under your display lights, but thatís just too cumbersome and unsightly for most people. And if put over a sump, these designs tend to cover the top of the sump like a lid, so you canít get to anything.

    If you have multiple tanks, a good bit of advice is to try a scrubber first on the smallest one, especially if itís freshwater, because that way you can get a feel for placement, lighting, cleaning, sounds, etc. before working up to a bigger one. Meanwhile if you want to take a look at modern scrubbers, here is our SURF2 floating model, shown floating on a saltwater reef pond:


    Happy Scrubbing!

    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	Guide to algae scrubber thumb 2.jpg‎
Views:	22
Size:	45.5 KB
ID:	7807   Click image for larger version

Name:	2-1.jpg‎
Views:	23
Size:	20.5 KB
ID:	7808   Click image for larger version

Name:	2-2.jpg‎
Views:	23
Size:	52.0 KB
ID:	7809   Click image for larger version

Name:	2-3.jpg‎
Views:	23
Size:	93.1 KB
ID:	7810   Click image for larger version

Name:	2-4.jpg‎
Views:	22
Size:	73.7 KB
ID:	7811  

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts