+ Reply to Thread
Results 1 to 5 of 5

Thread: SLIP.7 combo chaeto, waterfall, upflow

  1. #1
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    9,967

    SLIP.7 combo chaeto, waterfall, upflow

    The new SLIP.7 for nano back compartments. It can be operated in these combinations:

    Click image for larger version

Name:	slip.7-front-corner-right.jpg
Views:	40
Size:	92.0 KB
ID:	8068 Click image for larger version

Name:	slip.7-front-corner-left-big.jpg
Views:	44
Size:	95.7 KB
ID:	8069 Click image for larger version

Name:	slip.7-parts.jpg
Views:	39
Size:	73.8 KB
ID:	8070 Click image for larger version

Name:	slip.7-parts2.jpg
Views:	40
Size:	65.8 KB
ID:	8071

    Dimensions:
    9 inches tall (23 cm)
    3 1/2 inches wide (9 cm)
    1 3/4 inches thick (4.5 cm)

    Waterfall algae scrubber for up to 0.7 frozen cubes of food a day.
    - Fed from top water tubing
    - Fed from bottom water tubing
    - Fed from display overflow into back compartment

    Chaeto reactor for up to 0.3 frozen cubes of food a day.
    - Fed from top water tubing
    - Fed from bottom water tubing
    - Fed from display overflow into back compartment

    Upflow algae scrubber for up to 0.7 frozen cubes of food a day.
    - Fed from top air line
    - Fed from bottom air line

    Combo waterfall and chaeto.
    - Fed from top water tubing
    - Fed from bottom water tubing
    - Fed from display overflow into back compartment

    Combo waterfall and upflow (when compartment is halfway full).
    - Fed from top water tubing and top air line
    - Fed from top water tubing and bottom air line
    - Fed from bottom water tubing and top air line
    - Fed from bottom water tubing and bottom air line
    - Fed from display overflow into back compartment, and top air line
    - Fed from display overflow into back compartment, and bottom air line

    Combo chaeto and upflow (grow chaeto first, then turn on bubbles to grow algae on chaeto).
    - Fed from top water tubing, and top air line on switch
    - Fed from top water tubing, and bottom air line on switch
    - Fed from bottom water tubing, and top air line on switch
    - Fed from bottom water tubing, and bottom air line on switch
    - Fed from display overflow into back compartment, and top air line on switch
    - Fed from display overflow into back compartment, and bottom air line on switch

    Combo waterfall, chaeto and upflow (when compartment is halfway full; grow chaeto first, then turn on bubbles to grow algae on chaeto).
    - Fed from top water tubing, and top air line on switch
    - Fed from top water tubing, and bottom air line on switch
    - Fed from bottom water tubing, and top air line on switch
    - Fed from bottom water tubing, and bottom air line on switch
    - Fed from display overflow into back compartment, and top air line on switch
    - Fed from display overflow into back compartment, and bottom air line on switch

    Happy filtering!

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    9,967
    SLIP.7 setup for chaeto only (saltwater), overflow fed.

    https://youtu.be/WlbunSk413M
    https://www.facebook.com/SantaMonica...18699265538008

    Click image for larger version

Name:	slip.7 setup vid thumb - chaeto only overflow fed.JPG
Views:	37
Size:	72.4 KB
ID:	8072

    Using the overflow from a nano display, to feed into the top of the SLIP.7 which slips down into the back of nano AIO back compartment sumps.

    Dimensions:

    9 inches tall (23 cm)
    3 1/2 inches wide (9 cm)
    1 3/4 inches thick (4.5 cm)

    Not shown is the GEM5 black shade screen inside.

    Also, a small block of black filter foam could be added at the botton to catch any chaeto particles, and to block all remaining light out of the bottom.

    Version 1.1

    SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

    Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

  3. #3
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    9,967
    SLIP.7 setup for waterfall only (saltwater), bottom fed.

    https://youtu.be/j9Dju-ccHs8
    https://www.facebook.com/SantaMonica...33592904528469

    Click image for larger version

Name:	slip.7 setup vid thumb - waterfall only - bottom fed.JPG
Views:	35
Size:	71.3 KB
ID:	8073

    Use a small water pump to feed into the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

    Dimensions:
    9 inches tall (23 cm)
    3 1/2 inches wide (9 cm)
    1 3/4 inches thick (4.5 cm)

    Not shown is the GEM5 black shade screen inside.

    Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

    Version 1.1

    SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

    Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

  4. #4
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    9,967
    SLIP.7 setup for upflow only (saltwater or freshwater), top fed

    https://youtu.be/zsoVy-BCLDY
    https://www.facebook.com/SantaMonica...35837064406004

    Click image for larger version

Name:	slip.7 setup vid - upflow only - top fed.JPG
Views:	33
Size:	66.8 KB
ID:	8075

    Use a small air pump to air into the top of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

    Dimensions:
    9 inches tall (23 cm)
    3 1/2 inches wide (9 cm)
    1 3/4 inches thick (4.5 cm)

    Not shown is the GEM5 black shade screen inside.

    Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

    Version 1.1

    SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

    Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

  5. #5
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    9,967
    SLIP.7 setup for chaeto with bubbles, bottom fed

    https://youtu.be/2W2eRfH-UIU
    https://www.facebook.com/SantaMonica...31224597943516

    Click image for larger version

Name:	slip.7 setup vid thumb - chaeto with bubbles - bottom fed.JPG
Views:	31
Size:	80.3 KB
ID:	8076

    Neat trick for saltwater: Grow chaeto first, then turn on air bubbles to grow slime, GHA, or cyano on the chaeto, then harvest all of it together.

    Use a small water pump and air pump for the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

    Dimensions:
    9 inches tall (23 cm)
    3 1/2 inches wide (9 cm)
    1 3/4 inches thick (4.5 cm)

    Not shown is the GEM5 black shade screen inside.

    Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

    Version 1.1

    SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

    Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts