SLIP.7 combo chaeto, waterfall, upflow

[SantaMonica]

The new SLIP.7 for nano back compartments. It can be operated in these combinations:



Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Waterfall algae scrubber for up to 0.7 frozen cubes of food a day.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Chaeto reactor for up to 0.3 frozen cubes of food a day.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Upflow algae scrubber for up to 0.7 frozen cubes of food a day.
- Fed from top air line
- Fed from bottom air line

Combo waterfall and chaeto.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Combo waterfall and upflow (when compartment is halfway full).
- Fed from top water tubing and top air line
- Fed from top water tubing and bottom air line
- Fed from bottom water tubing and top air line
- Fed from bottom water tubing and bottom air line
- Fed from display overflow into back compartment, and top air line
- Fed from display overflow into back compartment, and bottom air line

Combo chaeto and upflow (grow chaeto first, then turn on bubbles to grow algae on chaeto).
- Fed from top water tubing, and top air line on switch
- Fed from top water tubing, and bottom air line on switch
- Fed from bottom water tubing, and top air line on switch
- Fed from bottom water tubing, and bottom air line on switch
- Fed from display overflow into back compartment, and top air line on switch
- Fed from display overflow into back compartment, and bottom air line on switch

Combo waterfall, chaeto and upflow (when compartment is halfway full; grow chaeto first, then turn on bubbles to grow algae on chaeto).
- Fed from top water tubing, and top air line on switch
- Fed from top water tubing, and bottom air line on switch
- Fed from bottom water tubing, and top air line on switch
- Fed from bottom water tubing, and bottom air line on switch
- Fed from display overflow into back compartment, and top air line on switch
- Fed from display overflow into back compartment, and bottom air line on switch

Happy filtering!

[SantaMonica]

SLIP.7 setup for chaeto only (saltwater), overflow fed.

https://youtu.be/WlbunSk413M
https://www.facebook.com/SantaMonica...18699265538008



Using the overflow from a nano display, to feed into the top of the SLIP.7 which slips down into the back of nano AIO back compartment sumps.

Dimensions:

9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any chaeto particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

[SantaMonica]

SLIP.7 setup for waterfall only (saltwater), bottom fed.

https://youtu.be/j9Dju-ccHs8
https://www.facebook.com/SantaMonica...33592904528469



Use a small water pump to feed into the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

[SantaMonica]

SLIP.7 setup for upflow only (saltwater or freshwater), top fed

https://youtu.be/zsoVy-BCLDY
https://www.facebook.com/SantaMonica...35837064406004



Use a small air pump to air into the top of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

[SantaMonica]

SLIP.7 setup for chaeto with bubbles, bottom fed

https://youtu.be/2W2eRfH-UIU
https://www.facebook.com/SantaMonica...31224597943516



Neat trick for saltwater: Grow chaeto first, then turn on air bubbles to grow slime, GHA, or cyano on the chaeto, then harvest all of it together.

Use a small water pump and air pump for the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.