SLIP.7

[SantaMonica]

SLIP.7 basic intro video:

https://youtu.be/rHsOWti9tZI

https://www.facebook.com/SantaMonica...18699265538008

[SantaMonica]

Now taking orders
https://www.santa-monica.cc/SLIP7_p_101.html

[SantaMonica]

[SantaMonica]

Update: Since the Fusion 700 air pump is no longer available, the Danner AP-4 is now recommended for most scrubbers, except the SURF4 or 4x which can use a Danner AP-8, and the SURF8 which needs a large single-outlet pump.

Note that all HOG and DROP models have 1 air inlet, therefore the 2 outlets of the Danner AP-4 pump can be combined into 1 with a "T" or "Y" fitting, and this will give you a lot of air which can still be reduced with the control knob. If you don't want to combine the outlets, then the smaller Danner AP-3 pump has only 1 outlet, but it also does not have a control knob.

https://www.dannermfg.com/supreme-ox...lume-air-pumps

[SantaMonica]

[SantaMonica]

Here is an initial growth sequence from a new SLIP.7 that looks to be in bubble-upflow mode. Photo 1 shows the screen's light blocker on the same side as the light, to block the strong light from the GEM5 light from overpowering the new growth. In photo 2, 3, and 4 the screen is reversed in the black top tray, so all the light can reach the screen.

[SantaMonica]

Here is a followup SLIP.7 growth photo, which is more filled in. You can see on the right of the screen where the LEDs of the GEM5 lights are, because the light is still too much for growth there.

[SantaMonica]

And here is another followup photo of the SLIP.7 growth, showing the white parts of the screen finally filled in and ready for cleaning/harvesting.