+ Reply to Thread
Results 1 to 2 of 2

Thread: Air flow question

  1. #1

    Join Date
    Aug 2021
    Location
    Canada
    Posts
    1

    Air flow question

    Hi - i just purchased a used hog 2.0 from someone and noticed that the air release tubing at the back has eroded to the point where 80% of the bubbles comes out from one spot near the side of the unit and the other 20% comes out from a nearby spot on the same side. The entire opposite side has no air flow through it but I suspect there must by some movement of water in that area as the chamber is not that big. Do you think this will present a problem or do you think I should configure some sort of tubing adjustment (maybe a larger tube over the entire air release area with new holes) to help equally disperse the bubbles across the entire bottom of the chamber? Thanks for your help and sorry for the long message (hope it makes sense).

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Santa Monica, CA, USA
    Posts
    10,134
    Welcome from Canada, if you can post some pics of the tubing or bubbles, with the red light off, that would help.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts