I built a scrubber yesterday. It cost about $25 but I also had some parts laying around I used too.
I'm using a Rio 1100 at the moment. It's a little too much flow ATM. Bulbs are 23W PC floods.
Nitrates at 20ppm
Phosphates at 0. I use RODI.
I built a scrubber yesterday. It cost about $25 but I also had some parts laying around I used too.
I'm using a Rio 1100 at the moment. It's a little too much flow ATM. Bulbs are 23W PC floods.
Nitrates at 20ppm
Phosphates at 0. I use RODI.
Nice simple low-cost build. Should work good. If you need higher filtering later, just clip on two more lights.
There are currently 1 users browsing this thread. (0 members and 1 guests)