+ Reply to Thread
Results 1 to 4 of 4

Thread: slot size???

  1. #1

    Join Date
    Sep 2010
    Posts
    276

    slot size???

    i cut my slot with a table saw it is about 1/8" wide. i only use one layer of plastic canvas. when i first started the scrubber the water would squirt out a bit on the very edges of the canvas so i made 4 perpindicular slots of 1/32" to relive a lil pressure . it has been 7 days running and its looking like the main slot in the pipe is about to clog because i am getting more and more water coming from the small slots rather than the main slot. is this normal for 7 days in? is this why you should clean every 7 days? or do i need a bigger main slot?

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,566

    Re: slot size???

    Just turn down the flow a little.

  3. #3

    Join Date
    Sep 2010
    Posts
    276

    Re: slot size???

    k

  4. #4

    Join Date
    Sep 2010
    Posts
    150

    Re: slot size???

    push canvas all the way in the slot.

    That evened out my flow problems. I used plastic table saw blade with 1/8th inch kerf too.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts