+ Reply to Thread
Results 1 to 7 of 7

Thread: Need Nano Scrubber

  1. #1

    Need Nano Scrubber

    Hello,

    I am still looking to add an angle turf scrubber on my 28 gallon bow style tank. Seems like every time I try to design one it will not work as I do not have a lot of room on top of my tank with the Nova 24" light I have on top of it. I definitely need something as the algae is really bad in the tank and has killed all my coral. Please let me know how to go about designing a system for this tank or what a turf scrubber would cost as I am losing the battle and my patience with this green hair algae.

    Thanks,

    G. Gilbert :x

  2. #2
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,574

    Re: Now designing: The Santa Monica 25 Nano Scrubber

    The 25 won't be available for a while.

    The 100 would work, and you could set it above your tank, but it's more money.

    Other than that, you could build an acrylic box to fit your space above, or add a sump with a simple diy below.

  3. #3

    Re: Now designing: The Santa Monica 25 Nano Scrubber

    How would I go about building one for my tank with and without a sump. At this time I do not have a sump on my systems. I am using a Rena Filstar XP1 filter on my tank at the moment but I need to do something immediately. What would the 100 gallon cost?

    Thanks,

    Glenn

  4. #4

    Re: Now designing: The Santa Monica 25 Nano Scrubber

    Hi Santa Monica,

    I found in my garage a Top Fin octagon style Nano tank with the measurements of 8.5 L x 8" x 13" H which uses a 120 volt 50 Hz halogen bulb. Could I possibly make this tank work for my 28 gallon aquarium. The light sits on top of the tank. If this will work, what else would I need to purchase?

    Thanks.

  5. #5
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,574

    Re: Need Nano Scrubber

    The info for the 100 is here: viewtopic.php?f=2&t=502

    And here are DIY placement options:






  6. #6

    Re: Need Nano Scrubber

    Thanks for the information. To make sure I have all the information I need before I get started.

    Since I found a way to put the scrubber above my tank and to the side of it, I figure I would need the following to build it.

    (1) At least a 6 x6 screen hung horizontal.
    (2) A 15 watt CFL bulb, one on each side of the screen.
    (3) A pump that handles at least 210 gph.

    Please let me know if I am correct.

    Thanks,

    Glenn

  7. #7
    Administrator
    Join Date
    Oct 2008
    Location
    Salt Lake City, Utah, USA
    Posts
    10,574

    Re: Need Nano Scrubber

    I think you mean hung vertical. Otherwise ok.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts