SLIP.7 basic intro video:
https://youtu.be/rHsOWti9tZI
https://www.facebook.com/SantaMonica...18699265538008
SLIP.7 basic intro video:
https://youtu.be/rHsOWti9tZI
https://www.facebook.com/SantaMonica...18699265538008
Now taking orders
https://www.santa-monica.cc/SLIP7_p_101.html
Update: Since the Fusion 700 air pump is no longer available, the Danner AP-4 is now recommended for most scrubbers, except the SURF4 or 4x which can use a Danner AP-8, and the SURF8 which needs a large single-outlet pump.
Note that all HOG and DROP models have 1 air inlet, therefore the 2 outlets of the Danner AP-4 pump can be combined into 1 with a "T" or "Y" fitting, and this will give you a lot of air which can still be reduced with the control knob. If you don't want to combine the outlets, then the smaller Danner AP-3 pump has only 1 outlet, but it also does not have a control knob.
https://www.dannermfg.com/supreme-ox...lume-air-pumps
Here is an initial growth sequence from a new SLIP.7 that looks to be in bubble-upflow mode. Photo 1 shows the screen's light blocker on the same side as the light, to block the strong light from the GEM5 light from overpowering the new growth. In photo 2, 3, and 4 the screen is reversed in the black top tray, so all the light can reach the screen.
![]()
This SLIP.7 has just been brushed clean, and is the smallest commercial waterfall scrubber in the world, and also the smallest chaeto reactor in the world. It has a UAS bubble upflow too, but it's not the smallest (the smallest upflow is the DROP.2). This is why it's a combo scrubber: All three types in one. And they can operate at the same time, or separately.
![]()
There are currently 2 users browsing this thread. (0 members and 2 guests)