This RAIN2 (tm) scrubber has the patented LED dome lid removed and shows some overgrown growth in saltwater. Needs to be cleaned/harvested sooner (tray too), because you can see the dead roots (hay colored growth) on the left side of the screen. The growth ring in the middle (from the strong GEM5 lights) however did it's job of keeping this area open for light and flow to continue; if this area had growth it would be even more blocked from flow and light and would have more dead roots and would let go:
http://algaescrubber.net/forums/show...3-Growth-Rings
Note that dead roots do not occur in bubble upflow models because the growth is always under water.
Also note how easy the patented tray is to clean, compared to box style scrubbers that you have to try to reach down into.
CJ Aquarium gets his RAIN2 up and running
https://youtu.be/oNGBUZ4rqhE
https://www.facebook.com/SantaMonica...9702045076964/
https://www.instagram.com/p/C67c0vBoP9W/
CJ Aquarium saltwater harvest of the RAIN2 (tm) with four GEM5 lights. Your harvest will probably vary. Nevertheless, feed it to the fish.
https://youtube.com/shorts/aeLDD-_7gyU
https://www.facebook.com/reel/3752930454985691
https://www.instagram.com/p/C77cBleIN_y/
The patented bottom tray of the RAIN2 and RAIN4 is the easiest to clean of any waterfall algae scrubber. Just lift up the LED dome lid. And if you want to clean the tray in your sink, just lift the tray up too (if it's on the patented pole mount). All other box-style scrubbers require you to reach down into the box and scrape the bottom, that is, if you can fit your hand in. And if you want to take those boxes to your sink, you have to disconnect everything. Not with the RAIN... you can take the tray to the sink without disconnecting anything, or turning off the water or the lights.
https://youtu.be/a2M_jRx2p_8
https://www.facebook.com/SantaMonica...17866054031627
https://www.instagram.com/p/C-dYqZNo1b3/
https://x.com/SantaMonicaFil/status/1821977283885986237
This is how to handle slime on waterfall screens which occurs in higher nutrients, which many times is when a scrubber is first added to an older tank.
This RAIN2 has an optional slime screen which has vertical slime rails on one side, allowing you to compare the rail side to the non-rail side. The left photo is without the rails, and the right side is with the rails. Another version of the screen has rails on both sides.
Slime, especialy dark slime like this, does not hold on well to waterfall screens. Even the high-gripping Green Grabber textues which hold better than any other waterfall screen sometimes has trouble. This is because slime has no roots and gets detached by gravity. The slime rails on this screen give much more surface area for the slime to hold on to, however, the screen still should be brushed throughly clean in your sink with tap water (so no algae is remaining) every 3 to 5 days, or else additional growth will have trouble attaching.
If the nutrients in the water come down because of the high filtering of the slime, and growth then turns into green hair algae, the regular stock flat screen (without rails) should be used again.
Screen info:
https://www.santa-monica.cc/Green-Gr...reen_p_82.html
Slime info:
http://algaescrubber.net/forums/show...he-best-filter
There are currently 1 users browsing this thread. (0 members and 1 guests)